The 3105 aluminum sheet belongs to the 3000 series aluminum-manganese alloy, which has good rust resistance and good deep drawing effect. The strength, elongation and processing performance of 3105 aluminum sealing plate can meet the production process of automatic high-strength bottle caps, and there will be no creases or cracks during processing. In addition, the pp cap material is made of 3105 aluminum sheet, which has a flat shape, no roller printing, and no oil spots, which is convenient for later printing, and the pattern is clear and recognizable.
The production characteristics of 3105 and 8011 aluminum plates for anti-theft caps are:
1. In the process of smelting, casting and rolling, the composition content of the aluminum alloy is optimized in a small range: the weight component content of Si accounts for 0.5-0.58% of the total weight of the alloy, and the weight component content of Fe accounts for 0.6% of the total weight of the alloy. -0.68%, the weight component content of Ti accounts for 0.015-0.025% of the total alloy weight; meanwhile, the weight component content of trace elements Mn, Mg and Cu respectively accounts for ≤0.03% of the total alloy weight.
2. During cold rolling, the above cast aluminum billets are cold rolled for 9-10 passes on a cold rolling mill. The rolling thickness of the first four passes is reduced by 10-25%. The finished product of the last pass is rolled with a thickness reduction of 10-25%, and the middle 45 passes are rolled with a thickness reduction of 30-40%. The final thickness of 3000 Series Aluminum Sheet used for pp cap products is 0.19-0.21 mm
3. Annealing During the production process of the cold-rolled billet, two intermediate anneals are performed: the first time is to select a high-temperature homogenization annealing with a thickness of 2.0-2.5 mm, the annealing temperature is 530-550 degrees, and the constant temperature time is 20 hours. The second intermediate annealing with a thickness of 0.4-0.6 mm, the annealing temperature is 430-450 degrees, and the rapid annealing method of heating to the set temperature in an empty furnace is adopted. After the constant temperature time is 10-12 hours, the furnace is stopped and kept for 1 hour before the furnace is released. Finally, it will be cold rolled to the desired thickness of aluminum sheet for the production of anti-theft hat products.
- FAVORITEN
-
- EXPLORE
-
-
-
-
-
-
-
Aluminum plate for anti-theft cap | Huawei Aluminum
Posted 2022-09-13 05:47:25
0
1114
Record
Recording 00:00
Commenting has been turned off for this post.
Nach Verein filtern
Read More
Psyonix brings out new ranked rewards every and every Rocket League Season
Psyonix brings out new ranked rewards every and every Rocket League Season, bringing lots of...
BRAND NEW GAME MODES & FREE PINK DIAMONDS Are Featured in the NBA 2K23 MyTeam Trailer
Before anything else, we want to watch the teaser. The teaser is shown to us. So, this is Josh...
You are now able to gain access to all of the information that you require pertaining to NBA 2K23
The most recent information pertaining to buy NBA 2k MTs has been made available to the public,...
5052 aluminum metal plate
Huawei Aluminium&# 8217;s 5052 aluminum plate is an iconic grade of the 5 series...
Ford additionally introduced that it'll once more be sponsoring the Rocket League
In addition to these new fashions, Ford additionally introduced that it'll once more be...